James Chem, Leading in Porous Adsorbents

• Synthetic porous adsorbent refers to synthetic, amorphous magnesium silicate, magnesium aluminum silicate, aluminum silicate, etc. It is a safe, pure fine white compound with a porous internal structure and enormous activated surface, products are ideal for use as adsorbents, anti-static flow agents, anti-caking agents, catalyst supports, carriers, and reinforcing fillers. It can get rid of chemicals with polarity as you want.

• We are a leading company in the porous adsorption material industry, with many patents and certificates. We are the first drafting unit of the national standard for food-grade magnesium silicate. Our first production line of synthesis magnesium silicate adsorbent was put into use in 1994, and the second production line was successfully launched in 2003. Our porous adsorption materials are not only used for purification essential oil but are also suitable for the production of green and clean energy.

Eliminate harmful impurities

Malondialdehyde, acryfamide, chloropropanol esters benzopyrene and other carcinogens.

Decolorization

Keep the frying oi staying clean and clear.

Remove odors

Eliminate ordos and provide crisp, golden and delicious

fried food.

Peroxide Value

(KOH)mg/g

Original Oil

0.77

1.8

Method 1

0.24

0.4

<0.06

0

Method 3

0.08

1.The original oil is treated with oil filter powder at 150℃ and then filtered

2.Mainly test the changes in color,acid value,and peroxide value.

3.Not specifically treated for acid value

James Chem Empowers Nature’s Green Energy: Biofuels

• Biodiesel has attracted attention worldwide as an eco-friendly alternative to fossil fuels for being renewable, non-toxic, biodegradable, and carbon-neutral. Impure fuel may cause engine oil to deteriorate, water and catalysts may corrode fuel injectors, soaps, and glycerides may clog fuel injectors, and methanol may cause seal failure. EN ISO 12937 specifies a maximum of 500 ppm (parts per million) of water in biodiesel. As FAME is hygroscopic it can pick up water in storage and because of this, there can be problems meeting the specification. At around 1500 ppm, the solubility limit is reached and the water becomes visible. Producers still using traditional "wet wash" systems may find this aspect of the EN Specification rather troublesome to achieve. Free water promotes biological growth and adverse reaction to transesterification which undoes biodiesel back into free fatty acids, which is disastrous in a fuel delivery system. 

James Chem, Your Simply Best Choice for Drying & Polishing of Biodiesel

• Synthetic magnesium silicate provide effective purification which removes residual soaps and metals which will lead to carbon residue.

• Synthetic magnesium silicate contribute to reduction of acid value which is a measure of free fatty acids contained in a fuel sample. 

• Reduce the polar components. glycerides and water have density higher, and it often sink into the bottom after settling. Both glyceride (other name like glycerin, glycerol) and water are polar chemicals which can be got rid of. According to EN14105 that a good transesterification reaction is achieved, as by achieving a transformation of more than 96.5%）

• Effectively reduce odor and decolorize the oil.

• Alkaline catalysts exhibit a better performance compared with other catalysts.（To pass EN14103 there must be a minimum ester transformation of 96.5% FFA's into methyl esters.)，magnesium silicate can provide effective purification processes enables the effective removal of residual traces of sodium and potassium which can lead to levels exceeding the 5mg/kg upper limit required by EN14109.

• PO₄ ^3- can be removed.（Removal of production residues and chemicals to pass EN14107 and also across the specification of standards which combine to meet EN14214.）  

James Chem,Your Trusted Partner

We not only have standardized products but also provide a one-on-one customized solution. No matter what challenges we meet, we solve them together. Should you have any questions or needs related to impurity removal, decolorization, agricultural residues removal in oil refining processes and biofuel innovation, please do not hesitate to contact our service consultant.