Contact now:info@jameschem.com
A Green, Cost-Effective Magic Disinfectant without Producing Chlorine Ammonia
A Green, Cost-Effective Magic Disinfectant without Producing Chlorine Ammonia
![]() |
|
Oxsmart™ Green Magic Disinfectant for Pool and Spa
• At present, swimming pool water is commonly sterilized with chlorine-containing disinfectants such as bleach powder, euchlorine, and strong chlorine. In addition to its disinfection function, chlorine is also widely used as an oxidizing agent to help remove contaminants that may come from various sources in the water, such as swimmer's metabolites (such as sweat, urine, dander, oil, etc.), various chemicals (such as sunscreen, skin care products, cosmetics), etc. Which not only includes natural reaction-generated organic matter but also includes synthetic organic matter. Only 10% of the chlorine added to spa water kills organisms. The remaining 90% oxidizes (destroys) contaminants. As contaminants build up in the pool water, they combine with the disinfectants to form chloramines or bromine. Chloramines cause foul odors and make the water cloudy and dull, leading to worse and worse water quality. A study in the United States has shown that the compound trichloromethane produced by the mixing of organic matter in swimming pools with chlorine-containing disinfectants in swimming pools is a cancer risk. |
To reduce the organic content of your water, you can use Oxsmart™ pool and SPA shock treatment in swimming pools and spas. It is a green disinfectant designed for swimming pools with active ingredients that do not produce chlorine ammonia. It is also suitable for use in hot springs and bathtubs.
|
![]() |
|
About Oxsmart™ pool and SPA shock treatment
• Oxsmart™ pool and SPA shock treatment fits easily into most water treatment programs for all types of pools and spas and provides sufficient oxidation to enhance sanitizer efficiencies and produce clear, sparkling water. It can be added to pool water day or night, and swimming can resume after a short waiting period to allow for adequate mixing and dispersion throughout the pool. • No mixing is required-Oxsmart™ pool and SPA shock treatment is completely soluble in water and dissolves quickly. Broadcast monopersulfate shock slowly and uniformly over the surface of the water, adding about two-thirds of the total dose over the deep end. Shock with the filter running to ensure complete mixing and good circulation. |
Pros: • It will not produce chloramines or generate irritating chloramines odors. • It can promotes maximum sanitizer efficiency by oxidizing and eliminating contaminant waste. • It restores sparkle and clarity, which is gentle on pool surfaces-dissolves quickly and completely and will not bleach or fade vinyl liners or painted surfaces. • It will not raise calcium hardness or increase cyanuric acid stabilizer levels. • It is easy to use-simply broadcast uniformly over pool water surface, with filter running, to ensure complete mixing and circulation. • It eliminates the need for ultra-chlorination, reduces routine maintenance steps and improves utilization in commercial operations. |
|
|
Reference dosage of Oxsmart™ Pool and SPA shock treatment Sanitizing Swimming Pools and Spas
• James Chem believes in prevention rather than cure and suggests that maintenance daily Oxsmart™ pool and SPA shock treatment sanitizing actions taken before failure are more cost-effective, less disruptive, and easier to manage than repair actions.
|
![]() |
|
For residential swimming pools: • For pools with moderate daily use, add potassium monopersulfate weekly at a dose of one pound per 10,000 gallons of pool water. More frequent and/or heavier doses may be required when bather loads are extremely heavy or following heavy rains or high winds.
For public swimming pools: • A good starting point is to shock weekly with one to two pounds of Oxsmart™ pool and SPA shock treatment per 10,000 gallons of pool water. The dose required and the shock frequency will depend largely on the bather load.
For Spas: • Oxsmart™ pool and SPA shock treatment should be added to spa water after every use, at a dose of about one to two ounces per 250 gallons, to immediately oxidize and eliminate organic contaminants introduced by bathers. Public spas which are used every day may need to oxidize with Oxsmart™ pool and SPA care daily.
*Please find our service consultant for more details.
|
James Chem,Your Trusted Partner
We not only have standardized products but also provide a one-on-one customized solution. No matter what challenges we meet, we solve them together. Should you have any questions or needs related to pool and SPA shock treatment, please do not hesitate to contact our service consultant. |
|
|
Related Products
![]() |
|||
Oxsmart™ Disinfection Tablet for Pool & Spa | |||
Oxsmart™ Green Magic Disinfectant for Pool and Spa
• At present, swimming pool water is commonly sterilized with chlorine-containing disinfectants such as bleach powder, euchlorine, and strong chlorine. In addition to its disinfection function, chlorine is also widely used as an oxidizing agent to help remove contaminants that may come from various sources in the water, such as swimmer's metabolites (such as sweat, urine, dander, oil, etc.), various chemicals (such as sunscreen, skin care products, cosmetics), etc. Which not only includes natural reaction-generated organic matter but also includes synthetic organic matter. Only 10% of the chlorine added to spa water kills organisms. The remaining 90% oxidizes (destroys) contaminants. As contaminants build up in the pool water, they combine with the disinfectants to form chloramines or bromine. Chloramines cause foul odors and make the water cloudy and dull, leading to worse and worse water quality. A study in the United States has shown that the compound trichloromethane produced by the mixing of organic matter in swimming pools with chlorine-containing disinfectants in swimming pools is a cancer risk.
To reduce the organic content of your water, you can use Oxsmart™ pool and SPA shock treatment in swimming pools and spas. It is a green disinfectant designed for swimming pools with active ingredients that do not produce chlorine ammonia. It is also suitable for use in hot springs and bathtubs.
|
About Oxsmart™ pool and SPA shock treatment
• Oxsmart™ pool and SPA shock treatment fits easily into most water treatment programs for all types of pools and spas and provides sufficient oxidation to enhance sanitizer efficiencies and produce clear, sparkling water. It can be added to pool water day or night, and swimming can resume after a short waiting period to allow for adequate mixing and dispersion throughout the pool.
• No mixing is required-Oxsmart™ pool and SPA shock treatment is completely soluble in water and dissolves quickly. Broadcast monopersulfate shock slowly and uniformly over the surface of the water, adding about two-thirds of the total dose over the deep end. Shock with the filter running to ensure complete mixing and good circulation.
Pros:
• It will not produce chloramines or generate irritating chloramines odors.
• It can promotes maximum sanitizer efficiency by oxidizing and eliminating contaminant waste.
• It restores sparkle and clarity, which is gentle on pool surfaces-dissolves quickly and completely and will not bleach or fade vinyl liners or painted surfaces.
• It will not raise calcium hardness or increase cyanuric acid stabilizer levels.
• It is easy to use-simply broadcast uniformly over pool water surface, with filter running, to ensure complete mixing and circulation.
• It eliminates the need for ultra-chlorination, reduces routine maintenance steps and improves utilization in commercial operations.
Reference dosage of Oxsmart™ Pool and SPA shock treatment Sanitizing Swimming Pools and Spas
• James Chem believes in prevention rather than cure and suggests that maintenance daily Oxsmart™ pool and SPA shock treatment sanitizing actions taken before failure are more cost-effective, less disruptive, and easier to manage than repair actions.
|
For residential swimming pools:
• For pools with moderate daily use, add potassium monopersulfate weekly at a dose of one pound per 10,000 gallons of pool water. More frequent and/or heavier doses may be required when bather loads are extremely heavy or following heavy rains or high winds.
For public swimming pools:
• A good starting point is to shock weekly with one to two pounds of Oxsmart™ pool and SPA shock treatment per 10,000 gallons of pool water. The dose required and the shock frequency will depend largely on the bather load.
For Spas:
• Oxsmart™ pool and SPA shock treatment should be added to spa water after every use, at a dose of about one to two ounces per 250 gallons, to immediately oxidize and eliminate organic contaminants introduced by bathers. Public spas which are used every day may need to oxidize with Oxsmart™ pool and SPA care daily.
*Please find our service consultant for more details.
James Chem,Your Trusted Partner
We not only have standardized products but also provide a one-on-one customized solution. No matter what challenges we meet, we solve them together. Should you have any questions or needs related to pool and SPA shock treatment, please do not hesitate to contact our service consultant.
Related Products
Oxsmart™ Disinfection Tablet for Pool & Spa